Product Categories
Contact Us
Ningbo Power Hydraulic Motor Co.,Ltd
Tel: 86-574-87193975
Fax: 86-574-23671688
Mobile: 86-18157449077
E-mail: shawn@motorpowers.com
Add:No.588 Danshuihong Road, Cixi City, Ningbo, China
Exhibition

Selection methods for pneumatic directional valves

Pneumatic valve pneumatic control system components, used to control the flow of fluids in the system, many model types, the user can choose according to their needs.
Directional control valve common types are the following:
According to outlet points: two, three, four and five-way; by job location: two and three. -Control: pneumatic and electric control and direct-acting and pilot-operated; according to the medium to be controlled: fluid valve and the gas valve function: normally closed and normally open, and drain and gas; in terms of structure: the cut-off valves and slide valves;
When choosing a pneumatic directional control valve, the following points should be noted:
1 the valve thread interface: valve nominal diameter corresponding to the air inlet thread is not one by one, therefore, should pay attention to when choosing directional control valve interface threads.
2 valve mounting dimensions: reversing valve of the same model, the functional due to different manufacturers its outline and installation dimensions vary.
3, directional movement is crisp, not a procrastinator.
4, solenoid valves, especially the AC solenoid valve should pay attention to the insulation. To ensure the safety of the operator.
5, the valve should be no leakage, leak within the smaller the better. Otherwise, it will affect the normal operation of the system, and a waste of energy.
6, pay attention to the date of manufacture of the valve, valve for far too long, the lubricating oil ages, affecting directional control valve work properly.